10 Pieces Vinyl Racing Car Stickers Auto Decals for Vehicles Trucks Vans

This set includes 10 numbered racing-themed auto stickers featuring high-gloss, glitter finishes with geometric and irregular shapes. Designed for vehicles, motorcycles, trucks, laptops, and other surfaces, these self-adhesive decals offer a stylish, auto-inspired look. They are primarily intended for single use and are recommended for application on glass or similar smooth surfaces to achieve the best adhesion and visual effect.

Enhance your vehicle's appearance with a custom car decal, designed to give your car a unique and stylish badge that will make it more attractive.Condition: Completely New Material: PET Professional Reflective Vehicle Decals, Appropriate for Outside or Inside Application Feature: Water-resistant, Sun-resistant, Strong Adhesive, Simple to Apply, Just Peel and Stick, They Will Not Damage the Color or Surface They Are Applied To Suitable Locations: Vehicle Windows, Doors, Rear, Windshield, Bonnet, Cover, Bumper, etc. Size/Colors: As Shown in ImagesRegarding installation: Applying the sticker is quite simple and takes just a few minutes. Your sticker consists of three components: the backing, the sticker itself, and the clear transfer film.Method for applying small car decals (dry application technique): 1. Ensure the surface is clean and dry; 2. Take off the backing paper from the rear; (Note: Keep the adhesive side facing up while carefully removing the backing paper. It is crucial that the adhesive side remains up.) 3. Check the placement and secure one corner; 4. Use a bank card or a scraper to smooth out any air bubbles by moving left or right; 5. Peel off the transfer film; 6. Finished. Avoid washing your vehicle for 48 hours.How to install large car decals (wet application method, which can also be used for smaller decals): 1. Required tools: cloth, spray bottle, dish soap, scraper or credit card. 2. Prepare a mixture: combine water and a small amount of dish soap in a spray bottle, then set it aside.3. Wash the surface and apply water uniformly on the area where the sticker will be placed. Remove the protective backing from the sticker and spray water evenly on the adhesive side. 4. Gently position the car sticker onto the vehicle's surface and make any necessary adjustments (the detergent water acts as a lubricant, reducing stickiness, allowing for easy repositioning).5. Once the location is set, position the center of the sticker as the starting point, and use a scraper to evenly push outwards. This is to eliminate any trapped water and prevent air bubbles; gently lift it, smooth it out again, and continue scraping. 6. Reassess for air bubbles, ensuring all are removed, then allow it to sit for 1 to 2 hours to dry the moisture in the sticker before removing the transfer film from its surface.7. Employ a utility knife to create an incision on the door and fabric, then adhere it to the interior. 8. Completed. Refrain from washing your vehicle for 72 hours.▲Important: 1. When removing the backing paper, ensure that the paper is oriented upwards and the transfer film is downwards. There might be loose stickers on the backing paper that can be pressed onto the transfer film using your fingers; 2. Once the backing paper is removed, be careful not to let the stickers stick to each other;3. Avoid washing the vehicle for 72 hours after applying the sticker, as it may not adhere fully during this period, and the high-pressure water from the car wash could cause it to peel off; 4. If you are inexperienced with installation, it is advisable to use the wet application method for a more secure fit!▲Note: If you lack installation experience, we suggest visiting a professional car modification shop for installation!