Wireless Relay Switch 4 Channel RF Remote Control for Home Automation

This is a Multi-Function RF Remote Control Switch Receiver with a 4 Channel Metal Transmitter. It is designed to work with DC 12V, 24V, or 36V power sources and can control up to 10A of current. The wireless system operates on a frequency of 433Mhz and has four channels for versatile control options.

A radio receiver with a copper rubber stick antenna and a metal four-button transmitter for controlling devices wirelessly using DC 12V, 24V, or 36V.Details of the Receiver: Product Model: AK-C211008 1. Voltage in operation: DC12V-36V 2. Standby state: Below 6mA 3. Operating temperature: -40°C to +80°C 4. Sensitivity of the receiver: greater than -105dBm 5. Operating frequency: 433MHz 6. Output voltage: Choice between DC and AC 7. Maximum load current: 10A 8. Dimensions: 95*62*28mmThe method of operation has been altered using the Learning button. For Momentary mode: Press the Learning Button once. The relay will turn On when pressed and Off when released. For Toggle mode: Press the Learning Button twice. The relay will turn On when pressed, and Off when the same button is pressed again. For Latched mode: Press the Learning Button three times. The relay will turn On when pressed, and Off when another button is pressed. For 2-channel Momentary + 2-channel Latched mode: Press the Learning Button four times. For 2-channel Momentary + 2-channel Toggle mode: Press the Learning Button five times.Press the Learning Button 6 times to activate 2-channel Toggle and 2-channel Latched modes. Learning: Press the learning button until the indicator flashes and turns off. Release the button, then press any button on the remote transmitter. The indicator will flash three times to indicate successful learning.To clear the code successfully, press and hold the learning button for about 8 seconds until the indicator light flashes several times and turns off. Then, press the remote control. If the relay does not respond, the code has been successfully cleared.Information on the Transmitter: 1. Number of Buttons: 4 2. Power Supply: DC6V 3. Frequency of Operation: 433MHz 4. Range of Remote Control: 20-50 meters 5. Current Consumption: 13 mAh 6. Encoding: EV1527