Privacy Protection Detector Anti-Spy Camera GPS Finder Infrared Sensor USB Rechargeable

Detect potential threats to your privacy with the Privacy Protection Detector. This device functions as an anti-spy camera and GPS tracker finder, making it perfect for travel, use in your car, bathroom, or office. The USB rechargeable detector boasts an impressive approximately 25-hour battery life and is equipped with an infrared sensor. Its sleek black PVC body is easy to read and comes with simple instructions for use.

Operating instructions A: Detecting radio frequencies (such as wireless cameras and listening devices): (1) Press and hold the power button for 3-5 seconds until you hear a beep. Release your finger, and the blue indicator light will illuminate. By default, it will search for wireless cameras and audio listeners when activated. (2) If the blue light blinks and you hear a sound alert, it signifies the presence of an emission source. The greater the number of blue light indicators, the stronger the signal.(3) Press the button to adjust WiFi sensitivity. An increase in blue lights indicates higher sensitivity, which broadens the search area. (4) The cycle adjustment sensitivity button decreases the number of blue lights, which lowers sensitivity, narrows the detection range, and ultimately helps locate the source of emission. B: Identifying concealed cameras (it is advisable to switch off the room lights):Press the ** "mode button" briefly, and the three infrared lights at the back will illuminate. Press the sensitivity adjustment button briefly to change the flashing speed of the red light. Each time the LED sensitivity button is pressed, the flashing frequency will increase by one level, allowing you to adjust the flashing speed of the red light in a loop.Adjust the device in various directions to carry out laser scanning of the nearby area, and look through the special filter connected to the machine. If a camera lens is in front, you will see a very intense bright spot flashing.C: Detecting magnetic fields with GPS: Press the ** mode button to activate the green light, then bring the magnetic field sensor near the source of the magnetic field. The blue light on the device will illuminate, and the buzzer will sound, signaling the detection of a magnetic field or potentially dangerous items with strong magnetism nearby. Additionally, you can enable vibration mode by pressing the power button to switch and it will vibrate once.