Tailgate Lift Bracket for Truck Bed Support Gas Damper Rod Replacement

Origin: Guangdong,China

A tailgate lift bracket designed for select pickup trucks, compatible with models from 2007 to 2019. It is specifically engineered to support the rear gas damper support rod, enhancing the ease and safety of opening and closing the tailgate.

1. Not firm: The original car single pole support is not firm 2. Hood hot 3. Open hard: Not enough height or strength to open the hood 4. Easy drop: The original car support rod: easy to get dirty, easy to drop, inconvenient to use After 1. Not need help: Easy to open, no need for other people to help.  2. Safety: It will not fall off after opening, it is very safe, and children also can easily open it.  3. Easy open: You can open in one hand.The support rod can be stretched.  Some support rods bear a lot of weight, and they cannot be stretched by hand alone. They must be installed and stretched by using the principle of leverage. The medium in the cylinder is hydraulic oil and nitrogen, and the process of expansion and contraction of the gas spring is to compress nitrogen. Product advantages 1.Double-layer oil seal, long lifeAdopt imported sealing ring & spacer double oil seal production process to prevent oil leakage and air leakage. 2.Thick stroke rod, solid design QPQ nitriding treatment, not easy to rust, stronger support. 3.High quality carbon steel Using high-quality 45# high-density seamless steel pipe, the surface is sprayed and baked at high temperature, no rust, no oil leakage. 4.Low temperature wear-resistant hydraulic oil 5.No fear of severe cold at minus 40 degrees 7.No punching, easy to installStep 1: Make sure you've got something to prop this door up.  Step 2: Using a blade similar to a screw-driver, insert it and pry the clip out.  Step 3: remove the old sturts. Step 4:  put in new lift support. Tips:  Don't compress the lift support by handle. with high pressure, the lift support are hard to be moved.  Attention: Compare the new lift supports with the old ones to ensure they can match up and always have someone help you during installation. Exceptional rating FAQQ1: Is there any abnormal sound after installation? Is it abnormal? A: Dear, the medium in the cylinder is hydraulic oil and nitrogen, and the process of stretching and contracting the gas spring is to compress nitrogen, so the smooth air pressure sound is a normal working performance, so you can rest assured. Q2: After receiving the support rod, it can't be pressed by hand, and it can't be stretched. Is it broken?A: Some support rods bear a lot of weight, and they cannot be stretched by hand alone. They must be installed and stretched by using the principle of leverage. Q3: Is the product pneumatic or hydraulic? A: The internal medium of the cylinder must have hydraulic oil and nitrogen. The nitrogen determines the size of the support force, and the hydraulic oil determines the cushioning of the support rod. Both the hydraulic rod and the pneumatic rod are the same product.Q4: Why doesn't the trunk pop up automatically after pressing the key with a new strut? A: The trunk is not a one-button start, so it will not change suddenly after replacement. After opening, you need to lift it up by hand, unless your original electric tailgate will open automatically. Q5: Can't install, what should I do if there is no installation manual? A: Please contact the seller, the seller will tell you how to install.